10BBC050-H30-BS03000 Precision where boards meet.
Review 10BBC050-H30-BS03000 using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
Every detail, in view.
Product geometry and related mating views. Confirm the exact variant before design-in.
Examine the connection.
Review the available product views and confirm this variant against the controlled drawing.
SELECT A VIEW BELOW
Designed down
to the contact.
Inspect the exact 30-contact socket before confirming the PCB layout.
0.5 mm pitch30 contactsDual rowFine pitch.
Defined spacing.
The 30 contacts are arranged in two rows at 0.5 mm pitch.
CONTACT GEOMETRYReview the
mating pair.
This rendering shows the H30 plug and socket separately. Confirm the exact variant and stack height against the controlled drawing.
MATING PARTSTwo parts.
One precise fit.
Compare the separate STEP renderings with the H30 mated assembly rendering.
Plug meets socket.
Use the H30 plug and socket for a 3.0 mm mating height.
About this model.
10BBC050-H30-BS03000 is a board-to-board connector listed in the factory product catalog. Its recorded selection points include 0.5 mm pitch, 30 contacts contacts, 3.0 mated height. The part number should be checked against the board or cable interface before any footprint is released.
The catalog lists SMT as the termination method. It names 10BBC050-H30-BPXXXXX as a mating part or series; engineering should confirm the precise counterpart and assembly height. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for 10BBC050-H30-BS03000. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 0.5 mm
- Mated height
- 3.0 mm
- Termination
- SMT
- Insertion force
- 0.981N(100gf) Per Pin MAX
- Mating direction
- Vertical mating
- Withdrawal force
- 0.07848N(8gf) Per Pin MIN
- Rows
- Dual row
- Contact material
- Phosphor bronze copper alloy
- Contact plating
- Gold 4 μin minimum at contact and solder areas
- Contacts
- 30 pin
02 Electrical
- Insulation resistance
- 500 MΩ minimum
- Rated voltage
- 50 V AC per pin
- Rated current
- 0.5 A AC/DC per pin
- Withstanding voltage
- 500 V AC
- Contact resistance
- 50 mΩ maximum initially; 100 mΩ maximum after testing
03 Environmental
- Mating cycles
- 50 cycles
- Operating temperature
- −40 ~ +125 ℃
- Housing flammability
- UL94V-0
04 Mating & assembly
- Mating part
- 10BBC050-H30-BPXXXXX
Specifications source: factory catalog (PPT, slide 29) / datasheet CSP-10BBC-00-00 rev C / factory supplementary record; revision pending confirmation. Confirm current controlled documents before design release.
Choose the pin count. Check the geometry.
Dimensions are in mm, following the drawing columns. In formula rows, n is the number of contacts per row.
| PIN count | DIM A (mm) | DIM B (mm) | DIM C (mm) |
|---|---|---|---|
| 10 contacts → | 5.60 | 2.00 | 4.20 |
| 20 contacts → | 8.10 | 4.50 | 6.70 |
| 30 contacts → · this model | 10.60 | 7.00 | 9.20 |
| 40 contacts → | 13.10 | 9.50 | 11.70 |
| 50 contacts → | 15.60 | 12.00 | 14.20 |
| 60 contacts → | 18.10 | 14.50 | 16.70 |
| 70 contacts → | 20.60 | 17.00 | 19.20 |
| 80 contacts → | 23.10 | 19.50 | 21.70 |
Geometry made legible.
Select a view to open it at full size.
Dimension drawing
Technical view 2
Technical view 3
Reference drawing
Reference drawing – request the controlled datasheet for design-in
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for 10BBC050-H30-BS03000?
The reference drawing and PIN × DIM table appear on this page. Request the controlled datasheet for design-in.
How do I check the mating part for 10BBC050-H30-BS03000?
Review the listed mating series and confirm the exact variant and stack height with engineering.
Can I request files or samples for 10BBC050-H30-BS03000?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.