CWB052-**S4L-01 Built for the connection.
Review CWB052-**S4L-01 using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
Every detail, in view.
Product geometry and related mating views. Confirm the exact variant before design-in.
Examine the connection.
Review the available product views and confirm this variant against the controlled drawing.
SELECT A VIEW BELOW
See the structure.
Review supplied product and engineering views. Confirm the exact variant against the current controlled drawing.
Check the
geometry.
Use this drawing as a reference for shape and orientation. Request the controlled drawing for the exact part before approving a PCB layout.
ENGINEERING VIEWTwo sides.
One system.
Review the mating counterpart, target stack height and assembly direction together.
Confirm the mating part.
The mating counterpart needs engineering confirmation. Do not infer intermateability from appearance or series name.
About this model.
CWB052-**S4L-01 is a wire-to-board connector listed in the factory product catalog. Its recorded selection points include 2.00 mm pitch, 2-15P contacts. The part number should be checked against the board or cable interface before any footprint is released.
The termination method should be confirmed for this exact order code. The matching half and ordering suffix still need confirmation from a controlled drawing. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for CWB052-**S4L-01. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 2.00 mm
- Contacts
- 2–15 pin
02 Electrical
- Contact resistance
- ≤20mΩ
- Rated voltage
- 250V
- Rated current
- 2.0A
- Withstanding voltage
- 1000V AC
- Insulation resistance
- 1000MΩ MIN
03 Environmental
- Mating cycles
- 50 cycles
- Operating temperature
- −25 ℃ ~ +85 ℃
Specifications source: factory catalog (PPT, slide 81). Confirm current controlled documents before design release.
Choose the pin count. Check the geometry.
Dimensions are in mm, following the drawing columns. In formula rows, n is the number of contacts per row.
| PIN count | DIM A (mm) | DIM B (mm) | DIM C (mm) |
|---|---|---|---|
| 2 | 2.00 | 4.80 | 6.00 |
| 3 | 4.00 | 6.80 | 8.00 |
| 4 | 6.00 | 8.80 | 10.00 |
| 5 | 8.00 | 10.80 | 12.00 |
| 6 | 10.00 | 12.80 | 14.00 |
| 7 | 12.00 | 14.80 | 16.00 |
| 8 | 14.00 | 16.80 | 18.00 |
| 9 | 16.00 | 18.80 | 20.00 |
| 10 | 18.00 | 20.80 | 22.00 |
| 11 | 20.00 | 22.80 | 24.00 |
| 12 | 22.00 | 24.80 | 26.00 |
| 13 | 24.00 | 26.80 | 28.00 |
| 14 | 26.00 | 28.80 | 30.00 |
| 15 | 28.00 | 30.80 | 32.00 |
Geometry made legible.
Select a view to open it at full size.
Dimension drawing
Reference drawing – request the controlled datasheet for design-in
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for CWB052-**S4L-01?
The reference drawing and PIN × DIM table appear on this page. Request the controlled datasheet for design-in.
How do I check the mating part for CWB052-**S4L-01?
Send the exact part number and target assembly to engineering for pairing review.
Can I request files or samples for CWB052-**S4L-01?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.