LD007 Built for the connection.
Review LD007 using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
Every detail, in view.
Product geometry and related mating views. Confirm the exact variant before design-in.
Examine the connection.
Review the available product views and confirm this variant against the controlled drawing.
SELECT A VIEW BELOW
3D model preview
Select a contact count to explore geometry, model measurements and available mating models. Models are for display; request controlled files for design-in.
Drag to rotate and scroll to zoom. Dimensions are measurements of the displayed model.
LD007
Controlled drawings are available from WCJM engineering on request. Shown as supplied in the CAD assembly: housing, shell and contacts.
- Model length
- — mm
- Model width
- — mm
- Model height
- — mm
See the structure.
Review supplied product and engineering views. Confirm the exact variant against the current controlled drawing.
Check the
geometry.
Use this drawing as a reference for shape and orientation. Request the controlled drawing for the exact part before approving a PCB layout.
ENGINEERING VIEWTwo sides.
One system.
Review the mating counterpart, target stack height and assembly direction together.
Confirm the mating part.
The catalog lists LD013. Confirm the exact variant, geometry and stack height with engineering.
About this model.
LD007 is a lvds connector listed in the factory product catalog. Its recorded selection points include 0.5 mm pitch, 40P contacts, 1.10 mm mated height. The part number should be checked against the board or cable interface before any footprint is released.
The catalog lists SMT as the termination method. It names LD013 as a mating part or series; engineering should confirm the precise counterpart and assembly height. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for LD007. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 0.5 mm
- Contacts
- 40 pin
- Mated height
- 1.10 mm
- Termination
- SMT
- Insertion force
- 16.2N MAX.
- Mating direction
- Side-entry (right-angle) mating
- Withdrawal force
- 4N MIN.
- Rows
- Single row
02 Electrical
- Insulation resistance
- 1000MΩ
- Rated current
- 0.1A~1A/pin
- Withstanding voltage
- 200V
03 Environmental
- Mating cycles
- 30 cycles
- Operating temperature
- −40 ~ 85 ℃
- Salt spray
- 48H
04 Mating & assembly
- Mating part
- LD013
Specifications source: factory catalog (PPT, slide 18). Confirm current controlled documents before design release.
Geometry made legible.
Select a view to open it at full size.
Dimension drawing
Technical view 2
Reference drawing – request the controlled datasheet for design-in
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for LD007?
The reference drawing appears on this page. Request the controlled datasheet for dimensional values and design-in.
How do I check the mating part for LD007?
Review the listed mating series and confirm the exact variant and stack height with engineering.
Can I request files or samples for LD007?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.