052_101_20P Built for the connection.
Review 052_101_20P using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
Every detail, in view.
Photographs show samples from this model series. Confirm contacts and order suffixes against the controlled drawing.
Examine the connection.
Review the available product views and confirm this variant against the controlled drawing.
SELECT A VIEW BELOW
See the structure.
Review supplied product and engineering views. Confirm the exact variant against the current controlled drawing.
Another angle.
More context.
This additional image is from the supplied materials. Where it shows a series representative, verify the exact order code before design-in.
PRODUCT PHOTOCheck the
geometry.
Use this drawing as a reference for shape and orientation. Request the controlled drawing for the exact part before approving a PCB layout.
ENGINEERING VIEWTwo sides.
One system.
Review the mating counterpart, target stack height and assembly direction together.
Confirm the mating part.
The mating counterpart needs engineering confirmation. Do not infer intermateability from appearance or series name.
About this model.
052_101_20P is a lvds connector listed in the factory product catalog. Its recorded selection points include 0.5 mm pitch, 20 contacts. The part number should be checked against the board or cable interface before any footprint is released.
The catalog lists Hot-bar soldering as the termination method. The matching half and ordering suffix still need confirmation from a controlled drawing. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for 052_101_20P. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 0.5 mm
- Contacts
- 20
- Termination
- Hot-bar soldering
- Insertion force
- 50N MAX
- Mating direction
- Straight mating
- Withdrawal force
- 10N MIN
- Rows
- Single row
02 Electrical
- Insulation resistance
- 100MΩ
- Rated current
- 0.3A
- Withstanding voltage
- 50V
03 Environmental
- Mating cycles
- 20 cycles
- Operating temperature
- −55 ~ 85 ℃
- Salt spray
- 48H
Specifications source: factory catalog (PPT, slide 17). Confirm current controlled documents before design release.
Geometry made legible.
Select a view to open it at full size.
Dimension drawing
Technical view 2
Reference drawing – request the controlled datasheet for design-in
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for 052_101_20P?
The reference drawing appears on this page. Request the controlled datasheet for dimensional values and design-in.
How do I check the mating part for 052_101_20P?
Send the exact part number and target assembly to engineering for pairing review.
Can I request files or samples for 052_101_20P?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.