CBB020-80S1F-01 Precision where boards meet.
Review CBB020-80S1F-01 using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
Every detail, in view.
Photographs show samples from this model series. Confirm contacts and order suffixes against the controlled drawing.
Examine the connection.
Review the available product views and confirm this variant against the controlled drawing.
SELECT A VIEW BELOW
3D model preview
Select a contact count to explore geometry, model measurements and available mating models. Models are for display; request controlled files for design-in.
Drag to rotate and scroll to zoom. Dimensions are measurements of the displayed model.
CBB020-80S1F-01
Built from the factory STEP only. Mating part, stack height and floating range are not confirmed.
- Model length
- — mm
- Model width
- — mm
- Model height
- — mm
See the structure.
Review supplied product and engineering views. Confirm the exact variant against the current controlled drawing.
Another angle.
More context.
This additional image is from the supplied materials. Where it shows a series representative, verify the exact order code before design-in.
PRODUCT PHOTOCheck the
geometry.
Use this drawing as a reference for shape and orientation. Request the controlled drawing for the exact part before approving a PCB layout.
ENGINEERING VIEWTwo sides.
One system.
Review the mating counterpart, target stack height and assembly direction together.
Confirm the mating part.
The catalog lists CBB007-80Pxx-xx. Confirm the exact variant, geometry and stack height with engineering.
About this model.
CBB020-80S1F-01 is a floating board-to-board connector listed in the factory product catalog. Its recorded selection points include 0.5 mm pitch, 80pin contacts, 4.75 mated height. The part number should be checked against the board or cable interface before any footprint is released.
The catalog lists SMT as the termination method. It names CBB007-80Pxx-xx as a mating part or series; engineering should confirm the precise counterpart and assembly height. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for CBB020-80S1F-01. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 0.5 mm
- Contacts
- 80 pin
- Mated height
- 4.75 mm
- Termination
- SMT
- Insertion force
- 10N MAX
- Mating direction
- Vertical mating
- Withdrawal force
- 5N MIN
- Rows
- Dual row
- Floating range
- 0.3 mm
- Contact material
- Copper alloy
- Contact plating
- Contacts: Ni underplate 50–100 μin; F: Au 15 μin min on contact area. Hold-down: Ni underplate 50–100 μin; matte tin 80–150 μin overall.
02 Electrical
- Insulation resistance
- 100 MΩ MIN
- Rated current
- 0.3A
- Withstanding voltage
- 150V AC
03 Environmental
- Mating cycles
- 2000 cycles
- Operating temperature
- Pending confirmation
- Salt spray
- 96H
04 Mating & assembly
- Mating part
- CBB007-80Pxx-xx
05 Other catalog data
- Housing
- Housing 1 and 2: high-temperature thermoplastic, UL94 V-0, black
Specifications source: factory catalog (PPT, slide 41) / drawing CBB020 rev B. Confirm current controlled documents before design release.
Choose the pin count. Check the geometry.
Dimensions are in mm, following the drawing columns. In formula rows, n is the number of contacts per row.
| PIN count | DIM A (mm) | DIM B (mm) | DIM C (mm) | DIM D (mm) | DIM E (mm) | DIM F (mm) | DIM G (mm) | DIM H (mm) |
|---|---|---|---|---|---|---|---|---|
| 60 | 23.6 | 16.7 | 18.6 | 19.4 | 22.4 | 24.06 | 14.5 | 23.16 |
| 80 | 28.6 | 21.7 | 23.6 | 24.4 | 27.4 | 29.06 | 19.5 | 28.16 |
Geometry made legible.
Select a view to open it at full size.
Dimension drawing
Technical view 2
Reference drawing – request the controlled datasheet for design-in
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for CBB020-80S1F-01?
The reference drawing and PIN × DIM table appear on this page. Request the controlled datasheet for design-in.
How do I check the mating part for CBB020-80S1F-01?
Review the listed mating series and confirm the exact variant and stack height with engineering.
Can I request files or samples for CBB020-80S1F-01?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.