CBB192-XXPXX-XX Precision where boards meet.
Review CBB192-XXPXX-XX using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
Every detail, in view.
Representative 10-contact STEP geometry; confirm the selected variant against its controlled drawing.
Examine the connection.
Review the available product views and confirm this variant against the controlled drawing.
SELECT A VIEW BELOW
3D model preview
Select a contact count to explore geometry, model measurements and available mating models. Models are for display; request controlled files for design-in.
Drag to rotate and scroll to zoom. Dimensions are measurements of the displayed model.
Pad layout is illustrative; refer to the controlled drawing.
CBB192-XXPXX-XX
Stack height is taken from the receptacle height in the drawing title; the mated section is not dimensioned on the drawing.
- Model length
- — mm
- Model width
- — mm
- Model height
- — mm
Displayed mating height: —
- Pitch
- 0.35 mm
- Product contacts
- 10, 30, 40, 50 pins
- Mated height
- Pending
- Rated current
- 0.5 A/contact (MAX 5A at total contact)
- Insulation resistance
- 1000 MΩ min
- Withstanding voltage
- 250 V AC / 1 minute
- Contact resistance
- Pending
- Operating temperature
- −55 to 85 °C
See the structure.
Review supplied product and engineering views. Confirm the exact variant against the current controlled drawing.
Another angle.
More context.
This additional image is from the supplied materials. Where it shows a series representative, verify the exact order code before design-in.
PRODUCT VIEWTwo sides.
One system.
Review the mating counterpart, target stack height and assembly direction together.
Confirm the mating part.
The mating counterpart needs engineering confirmation. Do not infer intermateability from appearance or series name.
About this model.
CBB192-XXPXX-XX is a board-to-board connector listed in the factory product catalog. Its recorded selection points include 0.35 mm pitch, 10, 30, 40, 50 pins contacts. The part number should be checked against the board or cable interface before any footprint is released.
The catalog lists SMT as the termination method. The matching half and ordering suffix still need confirmation from a controlled drawing. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for CBB192-XXPXX-XX. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 0.35 mm
- Contacts
- 10, 30, 40, 50 pins
- Contact plating
- 1 = fully gold-plated
- Mated height
- Pending confirmation
- Contact material
- Pending confirmation
- Termination
- SMT
02 Electrical
- Rated current
- 0.5 A/contact (MAX 5A at total contact)
- Insulation resistance
- 1000 MΩ min
- Withstanding voltage
- 250 V AC / 1 minute
- Contact resistance
- Pending confirmation
- Rated voltage
- Pending confirmation
03 Environmental
- Operating temperature
- −55 ~ 85 ℃
04 Mating & assembly
- Mating part
- Pending confirmation
05 Other catalog data
- Drawing product name
- 0.35MM BTB PLUG H=0.5mm
- Connector type
- Plug
- Packaging
- 1 = tape & reel
- Unmated component height
- 0.500 +0.10/0 mm
- Housing
- Pending confirmation
- Recommended PCB layout (mm)
- A ±0.02; pitch 0.350 ±0.02; pad width 0.200 ±0.02; 0.380 ±0.02; 0.300 ±0.02; 2.200 ±0.02; 1.000 ±0.02; 2.400 ±0.02
Specifications source: drawing CBB192 rev A. Confirm current controlled documents before design release.
Choose the pin count. Check the geometry.
Dimensions are in mm, following the drawing columns. In formula rows, n is the number of contacts per row.
| PIN count | DIM A (mm) | DIM B (mm) | DIM C (mm) |
|---|---|---|---|
| 10 | 1.400 | 2.160 | 3.070 |
| 30 | 4.900 | 5.660 | 6.570 |
| 40 | 6.650 | 7.410 | 8.320 |
| 50 | 8.400 | 9.160 | 10.070 |
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for CBB192-XXPXX-XX?
The reference drawing and PIN × DIM table appear on this page. Request the controlled datasheet for design-in.
How do I check the mating part for CBB192-XXPXX-XX?
Send the exact part number and target assembly to engineering for pairing review.
Can I request files or samples for CBB192-XXPXX-XX?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.