CBB187-XXSXX-XX Precision where boards meet.
Review CBB187-XXSXX-XX using the available catalog data, product view and reference drawings. Confirm the exact variant before design-in.
3D model preview
3D model pending.
See the structure.
Review supplied product and engineering views. Confirm the exact variant against the current controlled drawing.
Two sides.
One system.
Review the mating counterpart, target stack height and assembly direction together.
Confirm the mating part.
The mating counterpart needs engineering confirmation. Do not infer intermateability from appearance or series name.
About this model.
CBB187-XXSXX-XX is a board-to-board connector listed in the factory product catalog. Its recorded selection points include 0.35 mm pitch. The part number should be checked against the board or cable interface before any footprint is released.
The catalog lists SMT as the termination method. The matching half and ordering suffix still need confirmation from a controlled drawing. Consider contact assignment, insertion direction, tooling access and the total tolerance stack in the completed product.
Use the specifications and drawings below as a traceable starting point for CBB187-XXSXX-XX. Values shown for a series are not a substitute for a released variant drawing. Request the latest datasheet, confirm any pending fields with engineering and validate the complete assembly under your own project conditions before production design-in.
Engineering, at a glance.
Catalog values below are tied to the product series or variant shown. Request the current controlled datasheet.
01 Mechanical
- Pitch
- 0.35 mm
- Contacts
- Pending confirmation
- Contact plating
- 3 = selective gold on solder-side underside (semi gold/nickel); no gold on front of solder tails; gold at contact area
- Mated height
- Pending confirmation
- Contact material
- Pending confirmation
- Termination
- SMT
02 Electrical
- Rated current
- 0.5 A/contact (MAX 5A at total contact)
- Insulation resistance
- 1000 MΩ min
- Withstanding voltage
- 250 V AC / 1 minute
- Contact resistance
- Pending confirmation
- Rated voltage
- Pending confirmation
03 Environmental
- Operating temperature
- −55 ~ 85 ℃
04 Mating & assembly
- Mating part
- Pending confirmation
05 Other catalog data
- Drawing product name
- 0.35MM BTB RECEPTACLE H=0.61mm
- Connector type
- Socket
- Packaging
- 1 = tape & reel
- Unmated component height
- 0.610 +0.10/0 mm
- Housing
- Pending confirmation
- Recommended PCB layout (mm)
- Pending confirmation
- Drawing dimensions (mm)
- 1.400 ±0.05; 4.300 ±0.10; 2.790 ±0.05; 2.000 ±0.05; 1.960 ±0.05
Specifications source: drawing CBB187 rev A. Confirm current controlled documents before design release.
A connector is a system.
Check both halves and the intended stack height before approving a footprint.
Explore assembly contexts.
These guides explain system-level selection questions. The scenes are illustrations, not evidence that this exact model is qualified for an application.
IllustrationAutomotive cameras & ADAS sensors
Connector selection for compact camera and sensor boards designed for automotive applications.
IllustrationControllers & ECUs
Review stack height, retention and mating strategy for controller board assemblies.
IllustrationDisplays & infotainment
Board and signal interconnect planning for display modules and control electronics.
IllustrationIndustrial control
Connector options for compact boards in industrial equipment.
Precision has a process.
Founded in 2021, Weicheng designs and develops molds, automation equipment and production lines in-house. Approximately 90% of production processes are fully automated.
Explore manufacturing →
01 / PROCESSSTAMPING
02 / PROCESSMOLDING
03 / PROCESSASSEMBLY
04 / PROCESSINSPECTION
05 / PROCESSQUALITYThe files behind the design.
Request current controlled files for this exact model.
Datasheet
Current model specifications
2D drawing
Controlled dimensions and PCB layout
3D model
Mechanical integration file, if available
Good questions. Clear answers.
Where can I review dimensions for CBB187-XXSXX-XX?
The reference drawing appears on this page. Request the controlled datasheet for dimensional values and design-in.
How do I check the mating part for CBB187-XXSXX-XX?
Send the exact part number and target assembly to engineering for pairing review.
Can I request files or samples for CBB187-XXSXX-XX?
Add the part number to the technical inquiry with your target contact count, quantity and project stage.
Tell us what you are building.
Share the part number, target quantity and project stage.