0.5 mm Pitch Board-to-Board Connectors
10 factory catalog model records in this selection group. Confirm the exact order code against a current controlled drawing.
Products in this group
Only sourced values appear as confirmed. Pending values are not suitable for design release.
PRODUCT PHOTO10BBC050-H30-BPXXXXX
- Pitch
- 0.5 mm
- Contacts
- 10–80 pin
- Mated height
- 3.0/3.5/4.0/5.0 mm
- Termination
- SMT
10BBC050-H30-BSXXXXX
- Pitch
- 0.5 mm
- Contacts
- 10–80 pin
- Mated height
- 3.0 mm
- Termination
- SMT
10BBC050-H35-BSXXXXX
- Pitch
- 0.5 mm
- Contacts
- 10–80 pin
- Mated height
- 3.5 mm
- Termination
- SMT
10BBC050-H40-BSXXXXX
- Pitch
- 0.5 mm
- Contacts
- 10–80 pin
- Mated height
- 4.0 mm
- Termination
- SMT
10BBC050-H50-BSXXXXX
- Pitch
- 0.5 mm
- Contacts
- 10–80 pin
- Mated height
- 5.0 mm
- Termination
- SMT
CBB098-XXPXX-XX
- Pitch
- 0.5 mm
- Contacts
- 10–54 pin (even numbers; 2 × 5 to 2 × 27); 2 × n per drawing formula
- Mated height
- 2.0 / 2.5 / 3.0 mm, depending on mating socket
- Termination
- Reflow (SMT)
CBB099-XXSXX-XX
- Pitch
- 0.5 mm
- Contacts
- 10–54 pin (even numbers; 2 × 5 to 2 × 27); 2 × n per drawing formula
- Mated height
- 2.0 mm with CBB098
- Termination
- Reflow (SMT)
CBB015
- Pitch
- 0.5 mm
- Contacts
- 10–60 pin (even numbers), 70, 80, 90, 100, 110, 120
- Mated height
- Pending
- Termination
- SMT
CBB016
- Pitch
- 0.5 mm
- Contacts
- 04–120 pin (even numbers)
- Mated height
- Pending
- Termination
- SMT
10BBC050-H45-BSXXXXX
- Pitch
- 0.5 mm
- Contacts
- 10, 20, 30, 40, 50, 60, 70, 80 pins
- Mated height
- 4.5 mm
- Termination
- Pending
Compare the conditions that matter
Start with interface geometry and assembly space, then compare pitch, contacts, mated height and termination. A series-level value does not automatically apply to every order suffix.
| Model | Pitch | Contacts | Mated height | Termination |
|---|---|---|---|---|
| 10BBC050-H30-BPXXXXX | 0.5 mm | 10–80 pin | 3.0/3.5/4.0/5.0 mm | SMT |
| 10BBC050-H30-BSXXXXX | 0.5 mm | 10–80 pin | 3.0 mm | SMT |
| 10BBC050-H35-BSXXXXX | 0.5 mm | 10–80 pin | 3.5 mm | SMT |
| 10BBC050-H40-BSXXXXX | 0.5 mm | 10–80 pin | 4.0 mm | SMT |
| 10BBC050-H50-BSXXXXX | 0.5 mm | 10–80 pin | 5.0 mm | SMT |
| CBB098-XXPXX-XX | 0.5 mm | 10–54 pin (even numbers; 2 × 5 to 2 × 27); 2 × n per drawing formula | 2.0 / 2.5 / 3.0 mm, depending on mating socket | Reflow (SMT) |
| CBB099-XXSXX-XX | 0.5 mm | 10–54 pin (even numbers; 2 × 5 to 2 × 27); 2 × n per drawing formula | 2.0 mm with CBB098 | Reflow (SMT) |
| CBB015 | 0.5 mm | 10–60 pin (even numbers), 70, 80, 90, 100, 110, 120 | Pending | SMT |
| CBB016 | 0.5 mm | 04–120 pin (even numbers) | Pending | SMT |
| 10BBC050-H45-BSXXXXX | 0.5 mm | 10, 20, 30, 40, 50, 60, 70, 80 pins | 4.5 mm | Pending |
How to narrow the choice
Compare the candidate part with the PCB layout, contact assignment, mating direction and required tests. When a current controlled document differs from a catalog value, use the controlled document for design review.
Frequently asked questions
How should I select an exact model?
Start with board space, contact assignment, mating direction and target stack height. Then review the full order code and controlled drawing.
Does matching pitch prove mating compatibility?
No. Check interface geometry, orientation, stack height and tolerances.
Can a pending value be used for design release?
No. Request the current controlled specification and drawing for the exact order code.