Other Pitch Board-to-Board Connectors
4 factory catalog model records in this selection group. Confirm the exact order code against a current controlled drawing.
Products in this group
Only sourced values appear as confirmed. Pending values are not suitable for design release.
CBB013
- Pitch
- 0.635 mm
- Contacts
- 20–80 pin
- Mated height
- 10 mm
- Termination
- SMT
CBB014
- Pitch
- 0.635 mm
- Contacts
- 20–80 pin
- Mated height
- 10 mm
- Termination
- SMT
CBB017
- Pitch
- 1.25 mm
- Contacts
- 06–70 pin
- Mated height
- 5.0/6.5/7.0/10.4 mm
- Termination
- SMT
CBB018
- Pitch
- 1.25 mm
- Contacts
- 06–70 pin
- Mated height
- 5.0/6.5/7.0/10.4 mm
- Termination
- SMT
Compare the conditions that matter
Start with interface geometry and assembly space, then compare pitch, contacts, mated height and termination. A series-level value does not automatically apply to every order suffix.
| Model | Pitch | Contacts | Mated height | Termination |
|---|---|---|---|---|
| CBB013 | 0.635 mm | 20–80 pin | 10 mm | SMT |
| CBB014 | 0.635 mm | 20–80 pin | 10 mm | SMT |
| CBB017 | 1.25 mm | 06–70 pin | 5.0/6.5/7.0/10.4 mm | SMT |
| CBB018 | 1.25 mm | 06–70 pin | 5.0/6.5/7.0/10.4 mm | SMT |
How to narrow the choice
Compare the candidate part with the PCB layout, contact assignment, mating direction and required tests. When a current controlled document differs from a catalog value, use the controlled document for design review.
Frequently asked questions
How should I select an exact model?
Start with board space, contact assignment, mating direction and target stack height. Then review the full order code and controlled drawing.
Does matching pitch prove mating compatibility?
No. Check interface geometry, orientation, stack height and tolerances.
Can a pending value be used for design release?
No. Request the current controlled specification and drawing for the exact order code.